MicroPower Direct products are designed to provide long, reliable field life. Considerable attention is given to the proper selection, derating, and layout of all circuit components.
In addition, extensive reliability screening is also performed on all products as a routine part of production process.
The MPU-400F series provides 400W of output power in a very compact package. These power supplies feature a universal AC input; active power factor correction and full safety approvals.
Standard models operate from a universal input of 90 to 264 VAC, providing tightly regulated single outputs. Outputs are factory set to 12, 24, or 48 VDC, but are available over a range of 2 to 60 VDC. Standard features include filtering to EN 55022 Class B, active power factor correction to EN 61000-3-2 D, peak output power to 700W, and an input/output isolation of 3,000 VAC. All models are protected for over load, over voltage, over temperature and short circuit faults.
The MPU-400F series is an ideal solution for a wide variety of industrial power applications requiring high power density, robust performance, and economy.
The MA600MHI series is a family of compact, 6W DC/DC converters fully approved. Twelve models operate from wide 2:1 inputs of 9 to 18, 18 to 36, and 36 to 75 VDC, providing single and dual outputs of 5, 12, ±12, or ±15 VDC. Standard features include an I/O isolation of 4,000 VAC rms, efficiency to 80%, 2 μA maximum leakage current, reinforced insulation and input filtering.
All models of the MA600MHI family are packaged in a miniature 24-Pin DIP case. The series is an ideal solution for a variety of medical/industrial equipment applications requiring high isolation levels, compact packaging, safety/medical approvals and robust filtering.
LF500RU - A family of miniature SMT mountable 5W DC/DC converters; combines high performance features such as a wide 4:1 input range, tight line/load regulation and low noise operation with a compact SMT package.
MPM-01V family - Specifically designed to provide local/isolated power while meeting the tight space constraints of high density board level power applications.
Six standard models operate from a wide universal input of 85 to 305 VAC, providing tightly regulated outputs of 3.3, 5, 9, 12, 15, and 24 VDC.
Standard features include filtering to EN55022 Class B, I/O isolation of 3k VAC, and tight line/load regulation. All models are protected for overload and short circuit faults.
IGD1205W series hybrid integrated circuit specifically designed to drive N-channel IGBT modules.
Provides the I/O isolation, high speed, drive voltage stability and fault protection required to control most MOS gated power devices.
The IGD1205W converts TTL compatible input signals into a fully isolated +15V/-8V Gate drive with a peak drive current of 5A.
Typical applications would include high frequency welding systems, solar converters, uninterruptible power supplies (UPS) and automotive/appliance motor drives.
IDG962 - Designed to drive N-channel IGBT modules. It provides the I/O isolation, high speed, drive voltage stability and fault protection required to control most MOS gated power devices.
The IGD962 is recommended for use with:
- 600V Series IGBT (up to 600A)
- 1200V Series IGBT (up to 400A)
- 1700V Series IGBT (up to 200A)
A1500RU Series - Fourteen models operate from wide 4:1 inputs of 9 to 36 or 18 to 75 VDC; providing outputs of 3.3, 5.1, 12, 15, ±5, ±12, or ±15 VDC in a compact 24 pin DIP package.
A1500RU an ideal solution for a variety of board level power applications requiring high power density levels, robust performance and high reliability.
Specifically designed to provide reliable voltage conversion and/or power line isolation for space critical board level applications.
Standard features include a ±1% max line/load regulation, continuous short circuit protection, and efficiency as high as 81%. Also standard is a remote ON/OFF control input.
D300RU series - Featuring an ultra-wide 4:1 input voltage range, high efficiency, tight output regulation and high reliability.
Twenty one models operate from wide 4:1 inputs of 4.5 to 18, 9 to 36, or 18 to 75 VDC, providing single and dual outputs of 3.3, 5, 12, 15, ±5, ±12 or ±15 VDC.
MPO-40S - Eight standard models operate from a universal input of 90 to 264 VAC, providing tightly regulated single outputs.
Standard features include filtering to EN55022 Class B, compliance to EN 61000-4 and tight line/load regulation. All are protected for overload and short circuit faults.
Eight models operate from wide 4:1 inputs of 9 to 36 or 18 to 75 VDC; providing single outputs of 3.3, 5, 12, or 15 VDC.
Standard features include efficiency to 90%; line/load regulation of ±0.5% Max; I/O isolation of 1,500 VDC; and an output trim capability.
All models have output over voltage protection and continuous short circuit protection (with autorecovery). Also standard is a remote On/Off control input.
A family of low cost, single and dual output 4W AC/DC power supplies.
These compact modules are specifically designed to meet the "Green Power" requirements of the ErP directive while providing the small size, robust performance and economy required by many board level power applications.
Standard features include filtering to EN55022 Class B, I/O isolation of 3k VAC, and tight line/load regulation. All models are protected for over load, over voltage, and short circuit faults. The MTBF (per MIL HDBK 217F) of the MPM-04E series is greater than 330 khours.
The MPM-04E has a Class II input (IEC61140). This means it can be used without an earth ground connection. All models are approved to EN 60950 and are compliant to the Energy Star specification & ErP directive 2009/125/EC. The series is certified to CE and is RoHS compliant.
The MPM-04E series is packaged in a miniature PCB mount package. Each model is specified for operation over the wide operating temperature range of -25°C to +60°C (ambient).
The MPM-04E series is an ideal solution for a wide variety of board level applications in industrial & commercial equipment applications requiring high performance, miniature size and low cost. With its Class II input, the MPM-04E series is a good choice for remote or portable equipment where a reliable ground is often not available.
The SRS10A-12 is a point of load switching regulator in a compact SIP package that provides 10A of output current. This regulator is specifically designed to provide 10A of output current over a tightly regulated output voltage range of 0.75 to 5.0 VDC at efficiency levels up to 95%.
The SRS10A-12 operates over a wide input range of 8.3 to 14 VDC. The output is user adjustable (by the simple addition of an external resistor) over a range of 0.75 to 5.0 VDC. Standard features include efficiency as high as 95%, 0.5% maximum line/load regulation, very low noise operation and a fast transient response time. The SRS10A-12 includes thermal, overload and short circuit protection circuits as well as a remote on/off control. It is approved to EN 60950 and the MTBF (per MIL HDBK 217F) is 980 khours.
The SRS10A-12 is fabricated on a compact Single-Inline-Package (SIP) PC board with an industry standard pin-out. It is specified for operation over the wide industrial temperature range of -40°C to +85°C.
The SRS10A-12 series offers a unique combination of miniature size, high power density, high efficiency and economy. They are an ideal choice for a wide variety of "point of load" requirements in distributed power applications ranging from mobile telecommunications, data processing, and test instrumentation to board level power distribution subsystems.
These power supplies provide a universal AC input; active power factor correction; full safety approvals; robust filtering and compact construction.
Standard models operate from a universal input of 90 to 264 VAC, providing tightly regulated single outputs. Outputs are factory set to 12, 24, or 48 VDC, but are available over a range of 2 to 60 VDC.
Standard features include filtering to EN 55022 Class B, active power factor correction to EN 61000-3-2 D, peak output power to 700W, and an input/output isolation of 3,000 VAC. All models are protected for over load, over voltage, over temperature and short circuit faults.
Interface signals for Power On, Power Good Fan Fail and Remote On/Off are provided, as well as a driver output for an external fan. The MTBF (per MIL HDBK 217F) of the MPU-320 series is greater than 100 khours. All models are approved to EN 60950. The series is certified to CE and is RoHS compliant.
Eighteen models operate from wide 4:1 inputs of 9 to 36, or 18 to 72 VDC, providing single and dual outputs of 3.3, 5, 9, 12, 15, ±5, ±9, ±12 or ±15 VDC.
Standard features include tight line/load regulation, an input/output isolation of 1,500 VDC, continuous short circuit protection, and efficiency as high as 80%. Also standard is a remote ON/OFF control input.
The MTBF (per MIL HDBK 217F) of the D200ERU series is greater than 1.0 Mhours. Each model is specified for operation over the wide operating industrial temperature range of -40°C to +85°C. Cooling is by free-air convection.
Six standard models operate from a universal input of 85 to 264 VAC, providing tightly regulated single outputs of 3.3, 5, 9, 12, 15, or 24 VDC. Standard features include filtering to EN55022 Class B, input/output isolation of 3,000 VAC, and low leakage current.
The MPB-20S series has an MTBF (per MIL HDBK 217F) greater than 300 khrs. All models are approved to EN 60950. The series is certified to CE and is RoHS compliant.
The MPB-20S series is a "pin mount" design. They are fabricated on a compact 2.0 x 3.5 inch PC board that will plug into the users board (circuit height is 1 inch). Each model is rated for operation over the wide ambient operating temperature range of 0°C to +70°C.
The MPB-20S series is an ideal solution for innumerable applications requiring small size, robust performance and low cost. Application areas would include process control systems, test and measurement instrumentation, and board level power distribution systems.